Solar wireless parking camera system with license plate holder + 4.3” LCD + IP65 rating

Solar-powered WiFi reversing camera built into a license plate holder with 110° viewing angle, IP65 waterproof protection, and a 4.3” LCD monitor ensures safe, cable-free, and self-charging parking assistance via 2.4GHz wireless transmission. The unique reversing set is the most suitable parking assistant, thanks to which you will never lose overview of what is happening behind your vehicle during reversing or parking. The camera itself in the license plate is charged via SOLAR PANELS, so you do not need any cables to connect it.

You can easily estimate how far you are from an obstacle or another car. This complete reversing set will greatly simplify your parking. It has a camera with a wide angle of view of 110°, thanks to which you will see everything you need. The set can be easily connected via wifi 2,4Ghz transmitter and receiver without the need to install cables and drilling into the vehicle body.

Solar parking (reversing camera) without the need for recharging or pulling cables

The monitor can be easily placed onto the dashboard or front of the vehicle.

The 4,3" LCD monitor is powered via a car lighter. The display is colorful and has a 480x272 pixel resolution. The camera is placed on a flexible arm so you can adjust the angle of the camera according to your needs. You don't need any additional cables to connect the monitor and camera - everything works via a Wi-Fi connection. There is a touch point at the top of the display, which you can press to turn on the monitor - press it again to turn it off. The reversing set is perfect for cars or vans. The maximum distance of the transmitted image from the camera to the monitor is up to 20m.

The camera in the license plate holder can withstand even harsher weather conditions - IP65 certificate

Universal reversing camera in the license plate with built-in SOLAR charging, which can be used for any type of car. Easy and fast installation. The camera in the license plate holder will be only replaced with the original license plate holder, it is easy. The tilt of the camera can be adjusted. The camera has a trajectory, thanks to which you will see exactly the distance of the vehicle from the obstacle. If necessary, the camera also has a micro USB input for recharging, for example via a power bank or charger (not included in the package).

The camera is powered via solar panels, but you can also charge it via the microUSB port

Camera technical specifications:

• Image sensor - 1/3 CMOS VGA
• Charging - solar panels (even when cloudy)
• Pixels - 960x576w
• Frame ratio - 30fps
• Viewing angle - 110°
• Built-in battery - 1440mAh
• Signal transmission - wireless technology 2,4G Transmitter
• Power input - 5v/400mA microUSB
• RF frequency - 433,92mHz
• Operating temperature-10 ~ 50c
• Signal transmission between monitor and camera - max 20m

Monitor specifications:

• 4,3" TFT LCD monitor
• Switching on - touch ON/OFF button
• Pixels - 480x272
• Power supply - car lighter (DC 12V/1A)
• Guide auxiliary lines - yes
• Switching functionimage (mirror or original), reversing line (with or without) automatic/manual switch-off
• Working temperature from -10 ℃ +50 C
• Package contents:
• 1x Monitor
• 1x Solar camera
• 1x Monitor power supply
• 1x Screws for fixing the camera in the license plate holder
• 1x Suction cup holder for monitor
• 1x Monitor holder
• 1x Manual