Parking and reversing system – 7″ LCD monitor + HD camera with 11 IR LEDs and 6 sensors

Complete HD reversing system with 7″ LCD monitor, 145° night vision camera and six ultrasonic parking sensors – designed for safe reversing and precise parking of large vehicles and machinery.​ The right tool for safe reversing and parking. The monitor allows you to see the image from the rear camera and the STATUS of all 6 parking sensors. The 7-inch monitor has a sun visor and a mounting bracket. This exceptional set includes a 7" LCD monitor with HD camera with IR night vision 11x LED with protection up to IP68, which is mounted with a bracket on the rear of the car. The set also contains 6 parking sensors, which you can mount to the desired location using the L console, either forwards, sideways or backwards.

You can also connect a number of sensors from 2 to 6, depending on your needs

It is therefore an exceptional combination suitable for various types of larger cars, vans, minibuses, buses, semi-trailers, trailers, agricultural machinery, or trucks. Depending on your needs, you can also connect the number of sensors needed for a vehicle or construction vehicle. You can connect a minimum of 2 and a maximum of 6 sensors. If necessary, you can divide the sensors so you have the front and back of the vehicle covered.

The sensors have a 4-pin connector and are connected in series, which allows you to connect the sensors and the camera to the monitor you have in the driver's cab with an extension cable of your choice (5,10,15,20m). The sensor determines the distance to the obstacle on the screen graphically (icons green, yellow, red), but also numerically in meters. You can connect up to 3 cameras with VGA, HD, or FULL HD resolution to the monitor (cameras can also be combined). It is possible to connect cameras with VGA resolution. You can connect a camera with a 4-pin connector to two cables (cameras with a 4-pin connector can be found in our offer), or you can also connect one camera via a standard CINCH connector. If you do not want to use the CINCH connector, but also connect a third camera with a 4-pin connector, you can use our CINCH/4-pin connection cable, which we have in our offer.

Parking set determines the distance from the obstacle graphically (icons green, yellow, red), but also numerically in meters

On the 7" monitor, you can switch individual channels with a camera view (it is not possible to display all three cameras side by side). The monitor is equipped with an adjustable bracket that you can attach to the required location. It also includes a sun visor that guarantees a clear image and no glare. Reversing camera meets the degree of protection IP69 which makes it waterproof, dustproof and resistant to mechanical damage. The camera has a body made of durable aluminum alloy and you can install it on various surfaces via the console. The camera is powered and signal transmitted via a high-quality shielded connector with a 4-pin end, which has waterproof treatment, which will facilitate your work during installation. The camera is powered directly from the reversing monitor with a voltage of 12V.

Parking sensors with monitor and camera - Unique reversing set

In case you need to mount the monitor in a different way than with bracket (what is included in package), you can find in our offer another three more types of stands which allow you to attach your monitor for example onto a windshield or where is needed. In case you need to put the camera on a trailer that is able to remove from the car or truck, you can buy in our e-shop a connecting cable of reversing camera for trailers and semi-trailers. This ensure easy disconnection of the reversing system and re-connection.

7" LCD monitor
IR night vision camera thanks to 11xIR LEDs
Camera viewing angle up to 145°
IP68 protection of the camera
6 parking sensors

Specification:

• Operating voltage9-36V
• Power consumptionup to 6W
• Operating temperature-20 to 70° C
• MaterialABS + aluminum alloy
• Monitor:
• ModelPROFIO-VU70
• Size7" inches
• Resolution800x480 pixels (RGB)
• Viewing angleleft 80° / up 160° / down 120°
• Locationfreestanding/built-in
• Number of languages8
• Contrast800:1
• Backlight600cd/m2
• Effectsbrightness / contrast / resolution / color
• Speaker power5W
• Frequency60Hz
• Audio channels3CVBS
• Data recovery8x/s
• Detection range0,3 to 5 m
• Parking sensors:
• Installation methodfixing to the L bracket, or fixing to the hole
• Working modeultrasound 40K
• Sensor materialpiezo-electric ceramic
• ProtectionIP69
• Voltage8-24V
• Current10mA/piece
• Sensor scan frequency4x/s
• Sensor diameter16 mm
• Colorblack

Video camera:

• Image sensorCMOS 1/4"
• ResolutionHD 1280x720 (500 TV lines)
• SystemPAL/NTSC
• Minimum illumination0 LUX (IR on)
• IR night visionyes 11 IR LED
• Night vision distance15 m
• Viewing angle145°
• IP degree of protectionIP 68 waterproof, dustproof, damage resistant
• Power consumption3W
• Working temperature-20 to 70° C
• DC power supply12-24V
• InterfaceRCA
• Dimensions55x55x55 mm

Package contents:

• 1x 7" LCD monitor with sun visor
• 1x Monitor mounting bracket
• 1x Monitor mounting screws
• 1x Power cord
• 1x Manual
• 1x Reversing camera
• 3x 4 pin connecting cable of choice 5,10,15,20m
• 6x Parking sensors
• 6x Sensor mounting bracket
• 1x Sensor cable set
• 1x Mounting kit for sensors

You can choose the length of cables according to your needs 5m, 10m, 15m and 20m. Specify the cable length in the order note.